Select Page

How to Apply Preformed Thermoplastic

Table of Contents Surface Preparation Pre-heat The Area Apply ProTack Aerosol Application of the ThermaMark Heat The Thermoplastic Heat Until Fully Molten Overview: A quick how to video on the application of preformed thermoplastic. In this video we are applying...

How To Check And Replace A Recirculation Valve

Table of Contents Preparation Undo the Retaining Nut Take the Retaining Nut And Spring Off Removing The Valve Adjust Lever Back Overview: Brief look at what can block on a recirculation valve, how to check it and replace the wearing parts. The recirculation valve is...

How To Apply Internal And External Floor Graphics

Table of Contents Preparation Prime the Area Application of The Graphic Cover the Graphic With The Protective Silicone Then Roller Dispose Of Protective Silicone Overview: How to lay internal and external floor graphics. Those used in this demonstration are from the...

How to Align Graco LineLazer Front Wheel

Table of Contents Preparation Adjusting The Lever Application of Throat Sealer Liquid (TSL) Do Not Overfill Wipe Off Any Excess Adjust Lever Back Overview: Find out how to realign the front wheel of Graco LineLazer. To check the alignment of the steering wheel prior...

How To Apply Throat Seal Liquid Graco LineLazer

Table of Contents Preparation Adjusting The Lever Application of Throat Sealer Liquid (TSL) Do Not Overfill Wipe Off Any Excess Adjust Lever Back Overview: The main working part of the Graco Line Lazer Spray Machine is the fluid pump; there is provision for...